Ghost Immobiliser Fitting
Protect your vehicle from theft of keys, cloning and hacking with the world's first aftermarket immobiliser for CAN. With the added option to connect to an Ghost app and GPS tracking system that will send you alerts to call when your car is altered with or stolen.
The installation of the Ghost immobiliser can be done by a qualified technician. Making use of the correct tools, insulation tape and heat shrink tubing is essential.
Getting Started
In contrast to physical security devices like wheel locks or car alarms, ghost immobilisers safeguard your vehicle without the need for LEDs or key fobs. Instead they connect directly to the ECU's CAN network and can only be activated after entering a PIN code sequence. This gives a more secure level of protection against key hacking, cloning and even ECU swapping.
In the end, installing a ghost immobiliser Birmingham has to be done with extreme agility and accuracy. It's like navigating the minefield. A single mistake could cause severe damage to the circuits of your vehicle's electrical system. It is essential to comprehend the procedure for installing and prepare your vehicle properly.
First, you must prepare the vehicle by removing interior panels to make room for the immobiliser unit. Once you've found the perfect location to hide it, secure it in place using cable ties to prevent it from being removed or damaged. Then, tidy up the wiring by tying down loose wires, and then using insulation tape or heat shrink tubing to cover the exposed connections. This will reduce the risk of a short circuit that is not intended to happen and improve the appearance and reducing the chances of theft.
Find a reliable source of 12V power, as well as a grounding source for the ghost immobiliser. Once you've identified these and tested the power wires using a multimeter, to ensure they are delivering a consistent voltage. Then, connect Resource and CAN L wires from the immobiliser to the identified power source and grounding point.
Once you've made all of the necessary connections, it's important to double-check them and inspect the immobiliser for signs of corrosion or damage. The process of entering a PIN and launching the vehicle is a great way to test the system. This should be an ongoing part of your routine as it will help to identify any issues that may be occurring early. Regular testing will help prolong the life of your device and ensure it is functioning at its peak.
Preparing the vehicle
Installing a Ghost immobiliser is a process that requires expertise and tools. A wiring diagram of the vehicle is essential to locate the right wires and making accurate connections. A multimeter can be used to verify the electrical properties and ensure security. Insulation tape and cable tie can be used to secure connections and prevent alteration. A user's manual is provided for the Ghost Immobiliser. It will provide you with specific instructions specifically tailored to the model.
Once installed the ghost immobiliser can stop engine starts that are not authorized by requiring that the owner enter a unique code using the buttons on the steering wheel or console. This can be accomplished manually or remotely via the mobile phone app and the code can be altered by the owner of the vehicle at anytime. The device is also silent and unnoticeable by thieves as it does not emit any radio frequency.
A ghost immobiliser connects directly to the vehicle's CAN bus, a network that connects to all the vehicle's electronic control units (ECUs). It intercepts signals from the ECUs and blocks the engine from running if the ECU detects a false signal. The system is tamperproof and weatherproof, and does not include key fobs or LED indicators to draw the attention of thieves.
It can be positioned behind or in a less visible area so that it's not easily spotted by thieves and won't hinder vehicle performance. It can even be mounted inside a small, compact box which makes it less likely to be spotted during an inspection by unscrupulous salespeople selling cars.
Its stealthy operation, combined with its integration into the CAN-bus system of the vehicle, can be an effective deterrent to modern vehicle theft techniques, such as signal relay attacks and key copying. Combining the system with other security measures will create a formidable barrier that will deter even the most persistent of thieves. More and more insurance companies are recommending or require ghost immobilisers, as they can lower the cost of insurance.
Making Connections
Ghost immobilisers are silent, unlike traditional security systems that can be heard by thieves. They stop thieves from knowing that your car is on. They also block high-tech methods employed to steal vehicles, for instance, OBD port hacking. Installing them without leaving permanent marks on your vehicle is a great option for those who intend to sell their vehicle in the near future.
The Autowatch Ghost 2 CANbus immobiliser is one of the latest and most reliable solutions for preventing car theft. It utilizes the CAN data network to deactivate your engine and generates a pin code that only you know, meaning it's difficult for criminals to identify. It is compatible with many different automobiles, and it can work with a variety of features already installed like car alarms, steering wheel locks, GPS trackers, and door lock bypass.
If you decide to install an Ghost immobiliser for your vehicle, be sure to refer to the wiring diagram to identify the wires to connect. Check their locations to ensure they are correct, and then label them or tape them to help you remember them. You will also need to locate a source of continuous power (12V) and a grounding point to the system. Once you have these in place, you can start to make the connections needed to complete the installation.
When the ghost immobiliser is connected to your CAN bus it will prevent your vehicle from starting unless you enter a pin number using the buttons on the dashboard or the steering wheel. This will stop ECU hacking, key cloning, and other techniques of vehicle theft. how much is a ghost immobiliser can also be combined with other Thatcham approved security accessories such as alarms and tyre clips to provide your vehicle with an even higher security level.
As the UK automotive aftermarket market expands as do the options for securing your vehicle. With so many ways for thieves to break in and steal your car it's crucial to do everything you can to ensure it isn't stolen. That's why ghost immobilisers are such a popular choice among responsible car owners.
Testing the System
The Ghost Immobiliser communicates with the vehicle's ECU through a CAN network. This stops the engine from being started until a PIN code has been entered. This makes it very difficult for thieves to copy your key fob and start your car, and even more difficult to disable the system by hacking into its electronic components.
Ghost Immobilisers can also be used in conjunction with GPS tracking devices to assist you to locate your vehicle in the event that it is stolen. This isn't a common option for aftermarket security solutions however it's a great way to enhance your security and provide peace of mind knowing your vehicle is always protected.
The Ghost-II immobiliser not only provides enhanced security but also a pleasant experience for the user by getting rid of the need for additional key fobs or devices. It is simple and intuitive PIN code entry that can be integrated seamlessly with your everyday routine. Additionally, it provides deactivation modes and convenience features that let you temporarily disable the immobiliser to allow valet parking and servicing.
Make sure you have the tools you need and familiarise yourself first with the wiring of your vehicle. A basic set of hand tools will give you the ability to make precise connections, while a multimeter can help verify electrical values. Insulation tape and heat-shrink tubing are essential to safeguard connections from short circuits. Cable ties can be used to secure wiring. Additionally, it is essential to be in a well-lit space and wear appropriate safety gear when working with electrical tools and components.
You should test the Ghost immobiliser once you have completed the installation to make sure it's working correctly. Try to start the car without entering the PIN. If this fails, you'll need to test the system again and conduct a thorough examination of the connections.
The Ghost Immobiliser, unlike other security systems is a covert device that is not able to be detected by thieves. It is also more effective than physical deterrents like wheel clamps and steering locks. It is TASSA approved and recognised by some insurance companies, which makes it a cost-effective investment that will provide you with the peace of mind you deserve.